This page will contain external links about Faucet, as they become available.Tap (valve)TapA tap is a valve for controlling the release of a liquid or gas. For example, in Commonwealth English the word is used for any everyday type of valve, particularly the fittings on bathtubs and sinks. In American English the usage is sometimes more specialised, with the term tap restricted to uses such as beer taps and the word "faucet" used for water outlets; although some Americans use "tap" in the broader sense as well. Water tapsWater spigotWater for baths, sinks and basins can be provided by separate hot and cold taps; this arrangement is common in the UK, particularly in toilets. In kitchens, and in the US and many other places, mixer taps are often used instead. This is a single, more complex, valve whose handle moves up and down to control the amount of water flow and from side to side to control the temperature of the water (achieved by mixing the hot and cold water together). Latest designs do this using a built in thermostat. If separate taps are fitted, it may not be immediately clear which tap is hot and which is cold. In English-speaking countries, the hot tap generally has a red indicator and/or is labeled H or Hot. The cold tap generally has a blue or green indicator and/or is labeled C or Cold. Mixer taps may have a red-blue stripe or arrows indicating which side will give hot and which cold. In some countries there is a 'standard' arrangement of hot/cold taps: for example in the United States the hot tap is generally on the left. This convention applies in the UK too, but many installations exist where it has been ignored. Beer tapsWhile in other contexts, depending on location, a "tap" may be a "faucet", "valve" or "spigot", the use of "tap" for beer is almost universal. This may be because the word was originally coined for the wooden valve in traditional barrels. A "beer tap" now may be one of several items:
Gas tapsGas tapsAlthough a gas tap may be a valve that releases any gas, the word is most commonly used to refer to taps that control the flow of natural gas in the home (for gas fires) or in school science laboratories (for Bunsen burners). Physics of tapsMost water and gas taps have adjustable flow. Turning the knob or working the lever sets the flow rate by adjusting the size of an opening in the valve assembly, giving rise to choked flow through the narrow opening in the valve. The choked flow rate is independent of the viscosity or temperature of the fluid or gas in the pipe, and depends only weakly on the supply pressure, so that flow rate is stable at a given setting. At intermediate flow settings the pressure at the valve restriction drops nearly to zero from the venturi effect; in water taps, this causes the water to boil momentarily at room temperature as it passes through the restriction. Bubbles of cool water vapor form and collapse at the restriction, causing the familiar hissing sound. At very low flow settings, the viscosity of the water becomes important and the pressure drop (and hissing noise) vanish; at full flow settings, parasitic drag in the pipes becomes important and the water again becomes quiet. One reason that most beer taps are not designed for adjustable flow is that the beer itself is damaged by the pressure drop in a choked-flow valve: holding a beer tap partially open causes the beer to foam vigorously, ruining the pour. Tap MechanismsMost taps use a soft washer which is screwed down onto a seat in order to stop the flow. This is called a "globe valve" in engineering and, while it gives a leak-proof seal and good fine adjustment of flow, the tortuous S-shaped path the water is forced to follow offers a significant obstruction to the flow. For high pressure domestic water systems this does not matter, but for low pressure systems where flowrate is important, such as a shower fed by a storage tank, a "stop tap" or, in engineering terms, a "gate valve" is preferred. Gate valves use a metal disc the same diameter as the pipe which is screwed into place perpendicularly to the flow, cutting it off. There is no resistance to flow when the tap is fully open, but this type of tap rarely gives a perfect seal when closed. In the UK this type of tap normally has a wheel-shaped handle rather than a crutch or capstan handle. Cone valves are usually found in gas taps (and, incidently, the cask beer taps referred to above). They can be identified by their range of only 90º between fully-on and fully-off - usually when the handle is in line with the pipe the valve is on, and when the handle is across the pipe it is closed. A cone valve consists of a shallowly-tapering cone in a tight-fitting socket placed across the flow of the fluid. A hole through the cone allows the fluid to pass if it is lined up with the openings in the socket through which the fluid enters and leaves; turning the cone using the handle rotates the passage away, presenting the fluid with the unbroken surface of the cone through which it cannot pass. Valves of this type using a cylinder rather than a cone are sometimes encountered, but using a cone allows a tight fit to be made even with moderate manufacturing tolerances. Other meanings
This page about Faucet includes information from a Wikipedia article. Additional articles about Faucet News stories about Faucet External links for Faucet Videos for Faucet Wikis about Faucet Discussion Groups about Faucet Blogs about Faucet Images of Faucet |
|
Valves of this type using a cylinder rather than a cone are sometimes encountered, but using a cone allows a tight fit to be made even with moderate manufacturing tolerances. Lamps are covered under furnishings or lighting. A hole through the cone allows the fluid to pass if it is lined up with the openings in the socket through which the fluid enters and leaves; turning the cone using the handle rotates the passage away, presenting the fluid with the unbroken surface of the cone through which it cannot pass. Cone valves are usually found in gas taps (and, incidently, the cask beer taps referred to above). Surfaces:. In the UK this type of tap normally has a wheel-shaped handle rather than a crutch or capstan handle. Seating:. There is no resistance to flow when the tap is fully open, but this type of tap rarely gives a perfect seal when closed. Storage:. Gate valves use a metal disc the same diameter as the pipe which is screwed into place perpendicularly to the flow, cutting it off. . For high pressure domestic water systems this does not matter, but for low pressure systems where flowrate is important, such as a shower fed by a storage tank, a "stop tap" or, in engineering terms, a "gate valve" is preferred. Domestic furniture works, in conjunction with furnishings such as clocks and lighting, to create comfortable and convenient interior spaces. This is called a "globe valve" in engineering and, while it gives a leak-proof seal and good fine adjustment of flow, the tortuous S-shaped path the water is forced to follow offers a significant obstruction to the flow. In addition to furniture's functional role, it can serve a symbolic or religious purpose. Most taps use a soft washer which is screwed down onto a seat in order to stop the flow. Furniture can be a product of artistic design and is considered a form of decorative art. One reason that most beer taps are not designed for adjustable flow is that the beer itself is damaged by the pressure drop in a choked-flow valve: holding a beer tap partially open causes the beer to foam vigorously, ruining the pour. Storage furniture (which often makes use of doors, drawers, and shelves) is used to hold or contain smaller objects such as clothes, tools, books, and household goods. At very low flow settings, the viscosity of the water becomes important and the pressure drop (and hissing noise) vanish; at full flow settings, parasitic drag in the pipes becomes important and the water again becomes quiet. Furniture is the collective term for the movable objects which support the human body (seating furniture and beds), provide storage, and hold objects on horizontal surfaces above the ground. Bubbles of cool water vapor form and collapse at the restriction, causing the familiar hissing sound. Stadium seating. At intermediate flow settings the pressure at the valve restriction drops nearly to zero from the venturi effect; in water taps, this causes the water to boil momentarily at room temperature as it passes through the restriction. Park furniture. The choked flow rate is independent of the viscosity or temperature of the fluid or gas in the pipe, and depends only weakly on the supply pressure, so that flow rate is stable at a given setting. Hutch. Turning the knob or working the lever sets the flow rate by adjusting the size of an opening in the valve assembly, giving rise to choked flow through the narrow opening in the valve. Headboard. Most water and gas taps have adjustable flow. Door furniture. Although a gas tap may be a valve that releases any gas, the word is most commonly used to refer to taps that control the flow of natural gas in the home (for gas fires) or in school science laboratories (for Bunsen burners). Bed. A "beer tap" now may be one of several items:. Aquarium furniture. This may be because the word was originally coined for the wooden valve in traditional barrels. Street furniture. While in other contexts, depending on location, a "tap" may be a "faucet", "valve" or "spigot", the use of "tap" for beer is almost universal. Dining set (group). This convention applies in the UK too, but many installations exist where it has been ignored. Dinette (group). In some countries there is a 'standard' arrangement of hot/cold taps: for example in the United States the hot tap is generally on the left. Bedroom set (group). Mixer taps may have a red-blue stripe or arrows indicating which side will give hot and which cold. Table. The cold tap generally has a blue or green indicator and/or is labeled C or Cold. Folding table. In English-speaking countries, the hot tap generally has a red indicator and/or is labeled H or Hot. End table. If separate taps are fitted, it may not be immediately clear which tap is hot and which is cold. Desk. Latest designs do this using a built in thermostat. Coffee table. This is a single, more complex, valve whose handle moves up and down to control the amount of water flow and from side to side to control the temperature of the water (achieved by mixing the hot and cold water together). Stool (type of chair). In kitchens, and in the US and many other places, mixer taps are often used instead. Sofa. Water for baths, sinks and basins can be provided by separate hot and cold taps; this arrangement is common in the UK, particularly in toilets. Settee. . Recliner. In American English the usage is sometimes more specialised, with the term tap restricted to uses such as beer taps and the word "faucet" used for water outlets; although some Americans use "tap" in the broader sense as well. Ottoman. For example, in Commonwealth English the word is used for any everyday type of valve, particularly the fittings on bathtubs and sinks. Love seat. A tap is a valve for controlling the release of a liquid or gas. Footstool. In an analogy to controlling the flow of a fluid, tap can also refer to drawing electricity from a certain winding in an electrical transformer. Couch. To tap a vessel containing liquid metal is to remove the liquid from the vessel, even if no valve as such is utilised in the process. Chair. Bench. Wardrobe. Sideboard. Dresser (Chest of drawers). Cupboard. China cabinet. Chest. Cabinet (furniture). Bookcase. Frank Lloyd Wright. Shakers. Bauhaus. Art Deco. Arts and Crafts movement. Art Nouveau. |